The Printer Setup download link is provided by Canon iJ setup so you may continue installing the printer setup. You can configure the Canon Printer Model using the web tool ij.start.canon. Your system does not need to install the driver when you connect the Canon printer to your computer. ij.start.canon website is where you may obtain the Canon printer setup. The finest wireless printer to use with your device and print data quickly is a Canon. Canon CD is not the best method for installing Canon setup over a longer period of time. So all you have to do to download and set up Canon printers is go to ij.start.canon.
A Canon Printer Download
Setting up a Canon printer is simple. Additionally, even if you are not tech knowledgeable, you can figure it out. Users occasionally struggle to locate a trustworthy source from which to download the software, nevertheless. They can decide to use the ij.start.cannon. Both the Canon Printer Drivers and the Canon Printer software needed to configure the device wirelessly and with wired devices are available on the https //ij.start.canon. You will now be guided through the setup and installation process for the Canon printer using the technique that follows.
- Visit ij.start.canon.
- Type in the printer model.
- Install Driver.
- Install on your computer.
How to Download and Install Canon Printer Drivers and Software
If you're setting up a Canon printer for the first time, follow these setup instructions. Although the installation procedure using ij.start.canon can vary, the setup procedure for each Canon model is essentially the same. Let's start by setting up your Canon printer.
- Remove the printer's box wrapping or unbox it before removing it from the box.
- Now, carefully remove all the plastics and tappings from the printer hardware, which is packaged in a variety of ways for your safety.
- Make sure the surface is clean before setting the printer there. Be sure to position it close to the partnering device as well (computer or laptop).
- Verify the parts that are included in the inkjet printer's package. For instance, arrange a CD for Mac and Windows, a power cord, cartridges, and a manual.
- Next, attach one end of the power wire to the printer's power cord in the back and the other end to the power switch to begin a Canon Printer Setup.
- After that, hit the ON button to turn the printer on and supply power.
- When you notice a steady light, remove the paper tray and cover it.
- After installing the fine and ink cartridges, slide the paper guide.
- Place pristine, high-quality blank papers there and make sure everything is in place before inserting them.
- As a result, the Canon printer configuration is finished. Visit ij Start Canon to proceed and download the most recent printer driver.
References: Canon ij wireless setup