The Canon PIXMA MG2522 Wireless Inkjet Printer is a combination all-in-one wireless printer and scanner that can only print and scan. It is compatible with both Windows and Mac operating systems. It lacks networking and display capabilities. It is a low-cost printer that may be used at home or at work. Unpacking the printer, downloading the driver, installing the ink cartridges, and inserting the stack of paper into the input tray are some of the steps that need to be performed. There are several ways to connect the Canon Pixma MG2522 printer to routers and computers via WiFi and USB. The Canon Pixma MG2522 is available for Windows and Mac OS and can only be used with a direct USB connection. Here we'll go through some quick and easy step-by-step Canon Pixma Mg2522 Setup guides, including how to unbox and configure the printer.

A Canon Customer Service Center or ASF technician will attempt to diagnose the nature of the problem and, if possible, resolve the problem over the phone. If the problem cannot be resolved over the phone and you have selected the InstantExchange option, you will be given a reference number. You will be asked to provide the product serial number and other information about your product, as well as the delivery location for the replacement product (address must be included).

Process Canon pixma mg2522 wireless setup

While the Canon Pixma Mg2522 Wireless Setup can meet your wireless printing needs, you can also use the Canon Pixma MG2522 wired setup if you don't have access to a WiFi-enabled device. Use the following instructions to connect the printer to the computer using a USB cable:

You need to set up the Canon MG2522 printer before connecting it to WiFi. If you have the Canon Pixma MG2522 setup software, you can use it to setup the Canon Pixma wireless printer MG2522. If you don't have Canon Pixma MG2522 setup software, please visit Canon's official website to download it. Here's how to manually connect the Canon MG2522 printer to WiFi:

The Canon Pixma MG2522 printer connects to WiFi by turning on the printer via the power button. You need to install the latest Canon MG2522 driver. Press and hold the WiFi button on the printer until printing begins. The wireless LED starts blinking. The printer then scans for nearby networks.

Before you start setting up the Canon Pixma Printer MG2522, make sure you have all the printer accessories listed in the printer specifications. To open the printer, remove it from its packaging and place it on a flat surface. Then press and hold the WiFi button on the printer until the wireless light starts blinking. Before proceeding with Canon Pixma MG2522 printer setup, make sure your computer is connected to the same Wi-Fi network as the printer.

 

References: Canon Printer Mg2522 Setup